Any acura nsx gen 2 oil and filter replacement step by step we are gonna show you by pictures
What part needed?
1: Estimate 8 litres of 0W-40 synthetic oil
2: Oil filter part number is : 15430-RSR-E01
3: Honda oil plug crush washers
4: Rags, shop towels, optional incontinence pads
5: clips: Acura part number : 91505-TY2-003
What tool needed?
What part needed?
1: Estimate 8 litres of 0W-40 synthetic oil
2: Oil filter part number is : 15430-RSR-E01
3: Honda oil plug crush washers
4: Rags, shop towels, optional incontinence pads
5: clips: Acura part number : 91505-TY2-003
What tool needed?
- 6: Oil filter wrench: Acura part 07AAA-T6NA100 – I measured it and the internal diameter is 74mm, with 14 flutes, which is a common size so you might even have one already for another car.
- 7: 10mm, 17mm, and 22mm hex sockets
- 8: T30 torx bit
- 9: Slotted screwdriver, might also need a trim removal tool
- 10: Clip removal tool
- 11: Ratchets and extensions as necessary
- 12: Torque wrench(es) capable of measuring 7 lb-ft to 30 lb-ft
- 13: Pneumatic ratchet or cordless/corded drill highly recommended
- 14: designated Acura part 07AAZ-T6NA100)
- 15: Oil drain pan, 10L capacity
- 16: Oil dispensing container, 8L capacity
- let's start by pictures