V
VetteofSD
Guest
Hi guys,
I'm the original designer of the paddle shifter conversion kit. I have a partner that I have supplied these to at ModifiedVettes.com over the years. This is the exact same kit. If they have been unresponsive to emails for you lately, I know he was suddenly away for personal issues and they seem to be taking longer than anticipated. I do expect them to be back soon, but I do not know when.
I have some kits available myself that I will be selling off here and eBay.
I only have the pictured black / silver trim paddles currently. These are easy to paint, I've had multiple customers do this.
The Paddles/Fitment:
These will fit any 2006 - 2013 Corvette C6 and will work with any aftermarket steering wheel as long as the OEM paddle shifters are still usable.
If you just want the adapters so you can use your own paddles. Here is the link to my ad here on eBay for them. https://www.ebay.com/itm/325573257335
Installation:
The install is very straightforward and shouldn't take you more than an hour. Here are the basic steps involved. Note you will have to remove the airbag and disassemble the paddle assembly to do this.
1: Pop out and remove the steering wheel airbag.
2: Disconnect and unscrew the paddle-shift switch assemblies.
3: Remove the three cover screws and pull off the cover.
4: Pry out the lever assembly from the post mounts using a flat head and unscrew the paddle.
5: Install these adapters and reassemble. The paddles themselves are screwed into the adapters using the screws they came with.
6. (NOTE) on the left driver side paddle assembly, if it doesn't seem to spring back or "click" when you shift, then the main hex bolt that holds the paddle assembly on the wheel is too tight and it is hitting the bolt when you pull it. I don't know why this only happens on the left side, but it does. Unscrew the bolt approximately two full turns and test it. It will not be loose on in the unit.
If you haven't already, be sure to do the "F1" wiring mod as well so the paddles shift according to the markings on the paddles. There's
a great write-up available that can be found online by searching "corvette c6 F1 paddle mod". Very straightforward. Just swapping a pin in the right paddle harness.
What You Get:
1x Left Adapter
1x Right Adapter
1x Left Paddle - black with silver trim
1x Right Paddle - black with silver trim
Install Manual - (I will send you a PDF link when the kit is shipped)
I'm selling these for less just to clear them out. Have about 19 of them left.
Price: $100 shipped
If you have any questions please feel free to ask. If you're happy with your new paddles, be sure to post some pictures of your finished install! I love seeing people having fun with these. Thank you!
Continue reading...
I'm the original designer of the paddle shifter conversion kit. I have a partner that I have supplied these to at ModifiedVettes.com over the years. This is the exact same kit. If they have been unresponsive to emails for you lately, I know he was suddenly away for personal issues and they seem to be taking longer than anticipated. I do expect them to be back soon, but I do not know when.
I have some kits available myself that I will be selling off here and eBay.
I only have the pictured black / silver trim paddles currently. These are easy to paint, I've had multiple customers do this.
The Paddles/Fitment:
These will fit any 2006 - 2013 Corvette C6 and will work with any aftermarket steering wheel as long as the OEM paddle shifters are still usable.
If you just want the adapters so you can use your own paddles. Here is the link to my ad here on eBay for them. https://www.ebay.com/itm/325573257335
Installation:
The install is very straightforward and shouldn't take you more than an hour. Here are the basic steps involved. Note you will have to remove the airbag and disassemble the paddle assembly to do this.
1: Pop out and remove the steering wheel airbag.
2: Disconnect and unscrew the paddle-shift switch assemblies.
3: Remove the three cover screws and pull off the cover.
4: Pry out the lever assembly from the post mounts using a flat head and unscrew the paddle.
5: Install these adapters and reassemble. The paddles themselves are screwed into the adapters using the screws they came with.
6. (NOTE) on the left driver side paddle assembly, if it doesn't seem to spring back or "click" when you shift, then the main hex bolt that holds the paddle assembly on the wheel is too tight and it is hitting the bolt when you pull it. I don't know why this only happens on the left side, but it does. Unscrew the bolt approximately two full turns and test it. It will not be loose on in the unit.
If you haven't already, be sure to do the "F1" wiring mod as well so the paddles shift according to the markings on the paddles. There's
a great write-up available that can be found online by searching "corvette c6 F1 paddle mod". Very straightforward. Just swapping a pin in the right paddle harness.
What You Get:
1x Left Adapter
1x Right Adapter
1x Left Paddle - black with silver trim
1x Right Paddle - black with silver trim
Install Manual - (I will send you a PDF link when the kit is shipped)
I'm selling these for less just to clear them out. Have about 19 of them left.
Price: $100 shipped
If you have any questions please feel free to ask. If you're happy with your new paddles, be sure to post some pictures of your finished install! I love seeing people having fun with these. Thank you!
Continue reading...
