Permanent Diagnostic Trouble Code P0442 - EVAP Monitor Not Ready - Need Advice

C

cdrinkh2o

Guest
I'm getting my 12C ready for a California BAR smog test. The stock ECU was reset to the original ROM by my McLaren tech, and all mods reverted to stock parts. I have driven over 850 miles in five full drive cycles. A drive cycle consists of startup from cold, 10-15 minutes of stop and go street driving, 10-15 minutes of freeway driving over 60 mph, and a further 10-15 minutes of street driving.

I have used a BlueDriver OBD2 monitoring device to check for DTC codes, and the SMOG readiness...
 
Last edited by a moderator:
Top