Z
ZR8D08
Guest
I am at a loss right now with my rear view camera setup and am hoping someone on here can help me figure out why its not working. Im leaning towards my pac RP-GM11 old version is not working correctly. Heres why.. I installed my kenwood DMX9706S with the module and everything worked as it should, even the steering controls and reverse camera. A few months later the driver side speakers would go in and out. I traced it back to the connection into the gm11 module and zip tied it to hold it in place and fixed that issue. Now a few months later my reverse camera stopped working. I redid all the connections from splice connectors to hard wired. I checked the current for the power and its showing 12 volts on all my connections. I tried connecting another camera to see if the camera went bad and it did the same thing.. came on for a second, flickered a few times then nothing. Also to note the ground wire is hard wired to the reverse light and also shows 12volts. I have a Natika camera off Amazon that I mounted above my license plate. Has anyone had a similar issue? If so, what fixed it?
Continue reading...
Continue reading...
