E
esqu1re
Guest
Are the Type R front sway bars supposed to touch the spare tire holder plate on a NA2?
The photo below shows looking down into the "frunk." The sway bar is touching on both sides of the plate.
The photos below show where one of the bushings attaches to. Was I supposed to install the metal spacer in between the bushings and the car? It looks like if I remove the spacer, it would make the sway bar sit higher, possibly removing the rubbing issue.
Continue reading...
The photo below shows looking down into the "frunk." The sway bar is touching on both sides of the plate.
The photos below show where one of the bushings attaches to. Was I supposed to install the metal spacer in between the bushings and the car? It looks like if I remove the spacer, it would make the sway bar sit higher, possibly removing the rubbing issue.
Continue reading...
